Product

TLP Pro 835M – 8″ Wall Mount TouchLink Pro Touchpanel

Key Features

  • 8″ IPS touchscreen with 1280×800 resolution and 24-bit color depth
  • Native support for H.264 streaming preview
  • Works with any Extron IP Link Pro xi control processor
  • Transform your touchpanel into a standalone Pro xi Series control system using LinkLicense for TLP Control Processor and the TLCA 2 TouchLink Control Port Expansion Adapter
  • Multi-color status indicators
  • Optically bonded Gorilla® Glass screen is tough, scratch resistant, and smudge resistant
TLP Pro 835M Series
Display
   Screen typeIPS TFT active matrix color LCD
   Size8.0″ (20.3 cm) diagonal
   Resolution1280×800 (WXGA)
   Pixel density188.7 PPI
   Aspect ratio16:10
   Color depth24 bit, 16.7 million colors
   Brightness420 nits (cd/m²)
   Contrast1200:1
   BacklightLED with auto brightness control
   Viewing angle±80° horizontal, ±80° vertical
   Touch screenProjected capacitive
Memory
   RAM4GB DDR4
   Storage64GB eMMC
   Usable project storage32GB
Audio
   Speaker output2 stereo
   Playback format(s)
      Container formatWAV (Microsoft RIFF)
      EncodingLPCM (uncompressed)
      Bit depthUnsigned 8-bit
Signed 16-bit
Signed 24-bit
Signed 32-bit
      Sampling rateUp to 192 kHz
      Audio channelsMono or Stereo
Ethernet
   Connectors1 female RJ-45 connector
   Data rate10/100/1000Base-T, half/full duplex with autodetect
   ProtocolsDHCP, DNS, HTTP, HTTPS (redirect), ICMP, IEEE 802.1X, IPv4, LLDP, NTP, SFTP, SMTP, SNMP, SSH, SSL, TLS, TCP/IP, UDP/IP
   Default settingsLink speed and duplex level = autodetected
IP address = 192.168.254.251
Subnet mask = 255.255.255.0
Default gateway = 0.0.0.0
DHCP = off
DNS = 127.0.0.1
USB
   Quantity/type1 high-speed USB 2.0
   Connectors1 USB-C receptacle
   StandardsUSB 2.0, USB 1.1, USB 1.0
   Max. data ratesLow speed (1.5 Mbps), full speed (12 Mbps), high speed (480 Mbps)
Digital input
   Quantity/type1 digital input (configurable)
   Connectors(1) 3.5 mm captive screw connector, 2 pole
   Input voltage range0 to 24 VDC, clamped at +30 VDC
   Input impedance≥10k ohms
   Programmable pullup1k ohms to +5 VDC
   Threshold low to high2.8 VDC
   Threshold high to low2.0 VDC
   Pin configuration1 = Digital input, 1 = Gnd
Sensors
   Motion sensorOn/off
   Light sensorAuto/manual
Software
   TouchLink Pro touchpanels
      Configuration softwareGlobal Configurator Plus and Professional, GUI Designer
      Programming softwareControlScript Programing
      Control appsExtron Control
      Resource management softwareGlobalViewer Enterprise
      UtilitiesToolbelt, Embedded web page
General
   Power supplyNot included
   Power input requirementsPower over Ethernet (PoE 802.3af, class 3)
   Power consumption
      DeviceTBD
      Device and power injectorTBD
   Auxiliary power output
      USB5 VDC, 500 mA
   Thermal dissipation
      DeviceTBD
      Device and power injectorTBD
   Ambient temperature/humidityStorage: -4 to +140 °F (-20 to +60 °C) / 10% to 90%, noncondensing
Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing
   CoolingConvection
   MountingWall, furniture, or rack
   Enclosure typePlastic
TLP Pro 835M
   Enclosure dimensions5.09″ H x 8.00″ W x 1.26″ D
129 mm H x 203 mm W x 32.0 mm D
Touchpanel projects 0.84″ (21.3 mm) from the mounting surface.
   Product weightTBD
   Regulatory complianceCE, C-Tick, c-UL,FCC Class A, ICES, RoHS, UKCA, UL, VCCI, WEEE
   Product warranty3 years parts and labor; touchpanel display and overlay components are covered for 1 year
    NOTEAll nominal levels are at ±10%.
    NOTESpecifications are subject to change without notice.

The Extron TLP Pro 835M is an 8-inch Wall Mount TouchLink® Pro Touchpanel designed with advanced features and a fully customizable interface. A stunning new IPS display with optically bonded Gorilla® Glass provides enhanced brightness, viewing angles, and touch accuracy. The H.264 streaming input provides convenient video preview that supports simple, single-cable installation for power, network, and video. Multi-color status indicators provide immediate visual feedback for system states, alerts, or room availability. It is ideal for any environment requiring a wall mountable touchpanel with advanced features and a refined, modern look.

The TLP Pro 835M works with any Extron IP Link Pro xi control processor and is designed for use in AV system applications that require complete, interactive control of a broad range of source devices. TouchLink Pro touchpanels operate using standard network infrastructure and are easy to install with reliable and cost-effective Ethernet cable.

All TouchLink Pro touchpanels can be customized using Extron GUI Designer software. This powerful interface design software offers ready-to-use templates for a wide variety of rooms and presentation environments. These designs may be used as is, or customized for the application by simply changing individual graphic elements.

Transform This Touchpanel Into an Standalone xi Series Control System
Extron LinkLicense for TLP Control Processor is a powerful, easy way to turn your TouchLink Pro touchpanel into a full-featured, standalone Pro xi Series control system. With this LinkLicense, you can control your AV devices over the network directly from the Ethernet port on the touchpanel. And, by adding the optional TLCA 2 TouchLink Control Port Expansion Adapter, you can control a broad range of system devices directly from the touchpanel using the variety of ports on the control adapter.

The Extron TLCA 2 is a TouchLink Control Port Expansion Adapter designed to add traditional control ports to your TLP Pro 35 Series touchpanel installed with a LinkLicense for TLP Control Processor. It features two bidirectional serial ports, one digital input, one IR port, and two relays for control of sources, directly at the touchpanel.

Features

  • 8" IPS touchscreen with 1280x800 resolution and 24-bit color depth — IPS - in-plane switching display provides improved colors, contrast, and overall image quality.
  • Native support for H.264 streaming preview — Allows the touchpanel to display live streaming video preview from an IP camera or a streaming encoder such as the Extron SMP or SME series of products.
  • Works with any Extron IP Link Pro xi control processor
  • Transform your touchpanel into a standalone Pro xi Series control system using LinkLicense for TLP Control Processor and the TLCA 2 TouchLink Control Port Expansion Adapter — Supports up to eight Ethernet-controllable devices using GC Plus and 32 using GC Pro.
    • LinkLicense for User Interfaces can be applied to the touchpanel after a LinkLicense for TLP Control Processor is applied. LinkLicense for User Interfaces provides an easy way for people to use their mobile devices or computers as primary control interfaces in a system.
  • Multi-color status indicators — Provide immediate visual feedback for system states, alerts, or room availability. Pick from 10 predefined colors or use HEX color values for precise color matching for corporate branding or application-specific requirements.
  • Optically bonded Gorilla® Glass screen is tough, scratch resistant, and smudge resistant — Corning Gorilla® Glass is stronger and more scratch-resistant than standard glass, while maintaining touch sensitivity, color saturation, and brightness.
  • Increased memory for quicker page loads and expanded storage for larger projects
  • Supports PoE — Power over Ethernet delivers both power and data through a single Ethernet cable, simplifying installation and reducing clutter.
  • Integrated speakers — Provide audible feedback and support video preview functionality.
  • USB-C Port — Can be used to power the touchpanel or for supported accessories.
  • Light sensor adjusts screen brightness as the ambient room lighting changes
  • Digital input allows for a connection with a variety of devices, such as sensors and switches
  • Automatic clock synchronization — Ensures the touchpanel displays the correct time and date.
  • Energy-saving features:
    - Adjustable sleep timer puts touchpanel into sleep mode
    - Motion detector wakes touchpanel
  • Fully customizable using Extron control system software — GUI Designer combined with Global Configurator Plus, Global Configurator Professional, or ControlScript programming.
  • Manage, monitor, and control this device remotely using GVE — GlobalViewer Enterprise Resource Management software.
  • Supports landscape and portrait orientations
  • Versatile Mounting Options — Compatible with 1-gang horizontal or 2-gang US, EU, and MK junction boxes, the touchpanel can also be mounted on walls, lecterns, glass, or any flat surface. It supports global mounting standards, allowing flexible installation to meet diverse customer requirements.
  • Wide viewing angle — Provides optimum visibility whether sitting or standing.
  • Modern wall mount design complements any environment with a clean and professional look
  • Available in black and white
  • TAA compliant version available — Please inform your local Extron representative if your order requires compliance with TAA regulations.