Product

Back to Product Page
DM-NUX-R2-1G-B - DM NUX USB over Network Wall Plate with Routing, Remote, Black

DM-NUX-R2-1G-B – DM NUX USB over Network Wall Plate with Routing, Remote, Black

Extends and routes any USB 1.1 or 2.0 device across an Ethernet network or point-to-point over one CAT5e (or better) shielded twisted pair cable. Expands the USB routing capabilities of a DigitalMedia™ system and features virtual hub functionality. Mounts to a 1-gang electrical box.

Extends any USB 1.1 or 2.0 device up to 330 ft (100 m) point-to-point over one CAT5e (or better) unshielded twisted pair cable.

Whatsapp
Categories: , , Brand:
Communications
Ethernet100Base-T or 1000Base-T, Layer 2
LINK SpeedUp to 480 Mbps, dependent upon network speed and quality
USB Device SupportUSB 1.0/1.1 and 2.0 with Hub compatible including isochronous devices1
USB Hub SupportAny signal chain may include up to 4 USB hubs plus one DM‑NUX‑L2‑1G and one DM‑NUX‑R2‑1G1
Maximum USB Devices30 USB devices, or 4 USB hubs with 26 USB devices
Host Computer OS SupportWindows®, macOS®, and Linux® operating systems
USB ThroughputUSB 2.0 up to 480 Mbps, USB 1.1 up to 12 Mbps
Connectors – Local endpoint
24 V 0.75 A(1) 2-pin 3.5 mm detachable terminal block;
24VDC power input3
CONFIGFor factory use only
LINK(1) 8-pin RJ‑45 connector, female;
Connects to an Ethernet network or directly to a Remote endpoint2
IEEE 802.3af
USB(1) USB Type B connector, female
USB 2.0 device port for connection to the USB host computer, media server, game console, annotator, codec, etc.
Connectors – Remote endpoint
24 V 0.75 A(1) 2-pin 3.5 mm detachable terminal block;
24VDC power input
CONFIGFor factory use only
LINK(1) 8-pin RJ‑45 connector, female;
Connects to Link port on the Local endpoint2
IEEE 802.3af
USB(4) USB Type A connectors, female;
USB 2.0 host ports for connection of USB devices such as mice, keyboards, and other USB devices1
Indicators – Local endpoint
ACT(1) Amber LED, indicates data activity over the LINK connection
HOST(1) Green LED, indicates a valid connection to the USB host
LINK(1) Green LED, indicates a valid LINK connection to the Remote endpoint
PAIR(1) Pushbutton, used to establish a connection with a Remote endpoint
PWR(1) Blue LED, indicates operating power is supplied via the USB host
Indicators – Remote endpoint
ACT(1) Amber LED, indicates data activity over the LINK connection
HOST(1) Green LED, indicates a valid connection to the USB host at the Local endpoint
LINK(1) Green LED, indicates a valid LINK connection to the Local endpoint
PAIR(1) Pushbutton, used to establish a connection with a Local endpoint
PWR(1) Blue LED, indicates operating power is supplied via the power supply
Power
DM‑NUX‑L2‑1GInput: 100-240VAC, 50/60 Hz;
Output: 0.75A @ 24VDC

IEEE 802.3af powered device;
An optional ferrite bead is provided to reduce or prevent EMI (electromagnetic interference).3

DM‑NUX‑R2‑1GInput: 100-240VAC, 50/60 Hz;
Output: 0.75A @ 24VDC

IEEE 802.3af powered device
An optional ferrite bead is provided to reduce or prevent EMI (electromagnetic interference).3

Environmental
Temperature32° to 122°F (0° to 50°C)
Humidity20% to 80% RH (non‑condensing)
Enclosure
ConstructionMetal, black finish with white or black polycarbonate label overlay
Flush Wall MountMounts in an unobstructed North American 1-gang electrical box (not included);
FP-G1 series decorator style faceplate (not included)
Dimensions
Height4.12 in. (105 mm)
Width1.72 in. (44 mm)
Depth1.95 in. (50 mm)
Compliance
IC, FCC Part 15 Class B digital device

The DM NUX USB over Network Wall Plates with Routing (DM‑NUX‑L2‑1G and DM‑NUX‑R2‑1G) deliver reliable, high‑speed USB signal extension and routing for USB 1.0, 1.1, and 2.0 devices throughout a home, business, or campus for distances up to 330 ft (100 m). Featuring Virtual Hub capabilities, five DM-NUX-R2‑1G endpoints may simultaneously be connected to a single DM-NUX-L2‑1G endpoint. Creating this virtual hub allows numerous USB devices to control a single host device (such as a PC).1 The USB signals are transported over the local network and managed through a Crestron control system.

As part of a Crestron DigitalMedia™ system, the USB endpoints provide seamless routing of USB signals alongside video and audio. From any room with a video display, you can switch between several computers, media servers, and game consoles anywhere in the building and control each one using your mouse and keyboard, game controller, or electronic whiteboard.1 Sync your smartphone, upload photos, and share music and video files with a computer — all from clear across the building.

The USB endpoints expand on DigitalMedia’s built-in USB HID routing abilities, adding enhanced USB connectivity to DM® transmitters, receivers, or switchers without requiring any additional wiring. Simply connect a USB endpoint to the LAN port of a DM transmitter or receiver, or to a port on the local area network.4 Two types of wall plate USB endpoints are available:

  • DM-NUX-R2‑1G - Provides connectivity for up to four USB devices (keyboards, whiteboards, mobile devices, etc.) at one location
  • DM-NUX-L2‑1G - Provides connectivity for a single USB host (computer, media server, codec, etc.)

The USB endpoints may be used to provide simple, point‑to‑point USB signal extension, either over an Ethernet LAN or a dedicated CAT5e cable.2 At least one remote (device) endpoint (DM-NUX-R2‑1G) and one local (host) endpoint (DM-NUX-L2‑1G) are required to form a working system. The endpoints are sold individually to accommodate any system configuration.

The DM-NUX-L2‑1G and DM-NUX-R2‑1G mount in an unobstructed North American 1-gang electrical box and are compatible with the DM‑NUX‑L2 and DM‑NUX‑R2 endpoints.

NOTE: The DM-NUX-L2‑1G and DM-NUX-R2‑1G route USB signals over an Ethernet network. For simple point‑to‑point USB signal extenders, please refer to the USB over Category Cable Extender Wall Plates (USB‑EXT‑2‑REMOTE‑1G and USB‑EXT‑2‑LOCAL‑1G) or the USB over Category Cable Extenders (USB‑EXT‑2‑KIT).

Key Features
  • Provide reliable, high-speed USB signal extension for most USB 1.1 or 2.0 devices1
  • Compatible with Crestron® USB over Ethernet Extenders with Routing (DM-NUX-L2 and DM-NUX-R2)
  • Supports Virtual Hub capabilities with up to five DM‑NUX‑R2‑1G endpoints
  • Allow simple, point-to-point USB extension up to 330 ft (100 m) over CAT5e (or better)2
  • Power over Ethernet (PoE)3
  • Enable USB signal routing under the control of a Crestron control system or DigitalMedia™ system4
  • Mount in an unobstructed North American 1-gang electrical box (not included)
  • Plug-and-play compatible with most types of USB 1.1 and 2.0 devices and hosts1
  • No drivers required with Windows®, macOS®, or Linux® operating systems1
  • Transport USB over Ethernet or CAT5e at speeds up to 480 Mbps
  • Mass Storage Acceleration maximizes USB 2.0 bulk transfer speeds
  • Expandable using up to 4 USB hubs (not included)
  • DM‑NUX‑R2‑1G provides 4 USB Type A ports
  • Expand upon the USB-HID routing capabilities of a DigitalMedia™ system without additional wiring
  • Add USB host or device ports to any DM® transmitter, receiver, or switcher
  • USB local (host) or remote (device) endpoint sold individually for maximum flexibility