DM-NUX-R2 – DM NUX USB over Network with Routing, Remote
The DM-NUX-R2 delivers reliable, high‑speed USB signal extension and routing for USB 1.0, 1.1, and 2.0 devices throughout a home, business, or campus for distances up to 330 ft (100 m).
| Communications | |
| Ethernet | 100Base-T or 1000Base-T, Layer 2 |
| Link Speed | Up to 480 Mbps, dependent upon network speed and quality |
| USB Device Support | USB 1.0/1.1 and 2.0 with Hub compatible including isochronous devices1 |
| USB Hub Support | Any signal chain may include up to 4 USB hubs plus one DM‑NUX‑L2 and one DM‑NUX‑R21 |
| Maximum USB Devices | 30 USB devices, or 4 USB hubs with 26 USB devices |
| Host Computer OS Support | Windows®, macOS®, and Linux® operating systems |
| USB Throughput | USB 2.0 up to 480 Mbps; USB 1.1 up to 12 Mbps |
| Connectors – Local endpoint | |
| Link | (1) 8-pin RJ‑45 connector, female; Connects to an Ethernet network or directly to a Remote endpoint3 |
| USB | (1) USB Type B connector, female (USB B to A cable included) USB 2.0 device port for connection to the USB host computer, media server, game console, annotator, codec, etc. |
| Config | For factory use only |
| Connectors – Remote endpoint | |
| 24V 1A | (1) 2.1 x 5.5 mm DC power connector; 24VDC power input; PW-2407WU power pack included |
| Link | (1) 8-pin RJ‑45 connector, female; Connects to an Ethernet network or to the Link port on the Local endpoint3 |
| USB | (4) USB Type A connectors, female; USB 2.0 host ports for connection of USB devices such as mice, keyboards, and other USB devices1; Available USB Power: Up to 600 mA at each port concurrently; Up to 1A when two or fewer ports are in use NOTE: The USB connectors of a DM NUX Remote endpoint only supply power to the connected peripheral when a USB host is connected to a paired Local endpoint. |
| Config | For factory use only |
| Indicators – Local endpoint | |
| Activity | (1) Amber LED, indicates data activity over the Link connection |
| Host | (1) Green LED, indicates a valid connection to the USB host |
| Link | (1) Green LED, indicates a valid Link connection to the Remote endpoint |
| Pair | (1) Pushbutton, used to establish a connection with a Remote endpoint |
| Power | (1) Blue LED, indicates operating power is supplied via the USB host |
| Indicators – Remote endpoint | |
| Activity | (1) Amber LED, indicates data activity over the Link connection |
| Host | (1) Green LED, indicates a valid connection to the USB host at the Local endpoint |
| Link | (1) Green LED, indicates a valid Link connection to the Local endpoint |
| Pair | (1) Pushbutton, used to establish a connection with a Local endpoint |
| Power | (1) Blue LED, indicates operating power is supplied via the power supply |
| Power | |
| DM‑NUX‑L2 | USB powered via the USB host interface |
| DM‑NUX‑R2 | Input: 100-240VAC, 50/60 Hz; Output: 0.75A @ 24VDC; PW-2407WU power pack included |
| Environmental | |
| Temperature | 32° to 122°F (0° to 50°C) |
| Humidity | 20% to 80% RH (non‑condensing) |
| Enclosure | |
| Construction | Black anodized aluminum |
| Mounting | Freestanding or surface mount (mounting bracket included) |
| Dimensions | |
| Height | 1.02 in. (26 mm) |
| Width | 3.94 in. (100 mm) |
| Depth | 2.99 in. (76 mm) |
| Compliance | |
| Regulatory Model: M201947001 CE, IC, FCC Part 15 Class B digital device | |
The DM NUX USB over Network with Routing (DM‑NUX‑L2 and DM‑NUX‑R2) deliver reliable, high‑speed USB signal extension and routing for USB 1.0, 1.1, and 2.0 devices throughout a home, business, or campus for distances up to 330 ft (100 m).2 Two types of USB endpoints are available:
- DM-NUX-L2 - Provides connectivity for a single USB host (computer, media server, codec, etc.)
- DM-NUX-R2 - Provides connectivity for up to four USB devices (keyboards, whiteboards, mobile devices, etc.) at one location
USB Signal Routing
When integrated with a DigitalMedia™ system, the USB endpoints provide seamless routing of USB signals alongside video and audio. The USB endpoints can connect directly to a DM® transmitter, DM receiver, or Ethernet network via CAT5e (or better) cable.2 From any room with a video display, you can switch between several computers, media servers, and game consoles anywhere in the building and control each one using a mouse and keyboard, game controller, or electronic whiteboard.1
Virtual Hub
Using Virtual Hub technology, five DM-NUX-R2 endpoints may simultaneously be connected to a single DM-NUX-L2 endpoint. Creating this virtual hub allows numerous USB devices to control a single host device (such as a PC).1 The USB signals are transported over the local network and managed through a Crestron control system.
USB HID Connectivity
The USB endpoints expand on DigitalMedia’s built-in USB HID routing abilities, adding enhanced USB connectivity to DM transmitters, receivers, or switchers without requiring any additional wiring. Simply connect a USB endpoint to the LAN port of a DM transmitter or receiver, or to a port on the local area network.2
Point-to-Point Connectivity
The USB endpoints may be used to provide simple, point‑to‑point USB signal extension, either over an Ethernet LAN or a dedicated CAT5e (or better) cable.2 At least one remote (device) endpoint (DM-NUX-R2) and one local (host) endpoint (DM-NUX-L2) are required to form a working system. The endpoints are sold individually to accommodate any system configuration.
NOTE: For alternative point‑to‑point USB signal extension, refer to the USB over Category Cable Extender Wall Plates (USB‑EXT‑2‑REMOTE‑1G and USB-EXT-2-LOCAL-1G) or the USB over Category Cable Extenders (USB‑EXT‑3‑KIT).
Endpoint Compatibility
The DM-NUX-L2 and DM-NUX-R2 are compatible with the DM‑NUX‑L2‑1G and DM‑NUX‑R2‑1G wallplates and DM NVX® endpoints that support USB 2.0 signal extension.
Key Features
- Provide reliable, high-speed USB signal extension for most USB 1.1 or 2.0 devices1
- Compatible with DM NUX Wall Plates (DM-NUX-L2‑1G and DM-NUX-R2‑1G)
- Compatible with DM NVX® endpoints that support USB 2.0 signal extension
- Support Virtual Hub capabilities with up to five DM‑NUX‑R2 endpoints
- Enable USB signal routing under the control of a Crestron® control system or DigitalMedia™ system2
- Plug-and-play compatible with most types of USB 1.1 and 2.0 devices and hosts1
- No drivers required with Windows®, macOS®, or Linux® operating systems1
- Transport USB over Ethernet or CAT5e (or better) at speeds up to 480 Mbps
- Mass Storage Acceleration maximizes USB 2.0 bulk transfer speeds
- DM‑NUX‑R2 provides 2 USB Type A ports, expandable using up to 4 USB hubs (not included)
- Expand upon the USB-HID routing capabilities of a DigitalMedia™ system without additional wiring
- Add USB host or device ports to any DM® transmitter, receiver, or switcher
- USB local (host) or remote (device) endpoint sold individually for maximum flexibility