DM-NVX-DIR-80 – DM NVX Director® Network AV Switching Appliance, 80 Endpoints
Facilitates configuration, control, and management of a large-scale AV network using DM NVX® encoder/decoders. Provides the virtual equivalent of a hardware-based DM® matrix switcher.
| Device Support | |
| Endpoints | Supports 80 DM NVX devices, each configured as an encoder or decoder |
| Domains | Supports a single domain (all endpoints are grouped together as a single system) |
| Communications | |
| Ethernet | 100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, SSL, TLS, SSH, IPv4, HTTPS web browser setup and control, Crestron 3-Series® or later control system integration |
| DM NVX (via Ethernet) | HDCP 2.2, AES audio/video content encryption, RTP, RTSP, SDP, ONVIF, IGMPv2, IGMPv3, SMPTE 2022, FEC (Forward Error Correction) |
| Connectors | |
| MGMT (front) | (1) 8-pin RJ-45 connector, shielded, female; 100BASE-TX/1000BASE-T Ethernet port for hardware management |
| USB 2.0 (front) | (2) USB Type A connectors, female, black; USB 2.0 host ports for factory use only |
| USB 3.0 (front) | (2) USB Type A connectors, female, blue; USB 3.0 host ports for factory use only |
| Ethernet 1 – 4 (front) | (4) 8-pin RJ-45 connectors, shielded, female; 100BASE-TX/1000BASE-T Ethernet ports for web browser, endpoint, and control traffic |
| 100-240V~ 2-4A 50/60Hz (rear) | (1) IEC 60320 C14 mains power inlet; Mates with removable power cord, included |
| Controls and Indicators | |
| MSG | (1) Blue LED, identifies the device when the unit identification process is initiated |
| Ethernet 1 – 2 | (2) Green LEDs, each indicates Ethernet activity on the corresponding Ethernet port |
| DISK | (1) Yellow LED, indicates SSD (solid-state drive) activity |
| PWR | (1) Green LED, indicates the unit is powered on |
| RESET | (1) Recessed pushbutton, initiates a hard reset |
| Power Button | (1) Push button, initiates boot up or shutdown |
| MGMT | (1) Amber LED and (1) bi-color green/orange LED; indicates Ethernet activity, speed, and link status for the management Ethernet port |
| Ethernet 1 – 4 | (1) Amber LED and (1) bicolor green/orange LED per each of (4) ports; each pair indicates Ethernet activity, speed, and link status for the corresponding Ethernet port |
| Power | |
| Mains Power | 4.0-2.0A @ 100-240VAC, 50/60 Hz |
| Power Consumption | 35 Watts at 100% CPU usage and fan speed |
| Environmental | |
| Operating Temperature | 50° to 95° F (10° to 35° C) |
| Operating Humidity | 8% to 90% RH (non-condensing) |
| Non-Operating Temperature | -40° to 158° F (-40° to 70° C) |
| Non-Operating Humidity | 5% to 95% RH (non-condensing) |
| Heat Dissipation | 119.4 BTU/hr |
| Construction | |
| Chassis | Metal, black finish; vented front, rear, and sides; variable speed fan cooled |
| Mounting | Freestanding or 1 RU 19-inch rack mountable (rack ears included) |
| Dimensions | |
| Height | 1.72 in. (44 mm) |
| Width | 17.21 in. (437 mm) without rack ears; 19.00 in (483 mm) with rack ears |
| Depth | 10.49 in. (267 mm) without rack ears |
| Weight | |
| 10 lb (4.54 kg) | |
| Compliance | |
| Regulatory Model | DM-XIO-DIR-80 |
| UL® Listed for US and Canada, CE, IC, FCC Part 15 Class B digital device | |
The Crestron DM-NVX-DIR-80 is an enterprise-grade network appliance that facilitates configuration, control, and management of a large-scale AV network using DM NVX® encoder and decoder endpoints, The DM-NVX-DIR-80 virtually emulates the functionality of a traditional hardware-based DM® matrix switcher, routing high-quality 4K streaming AV signals throughout a room, building, or campus.
The DM-NVX-DIR-80 supports a maximum of 80 DM NVX endpoints. Multiple DM NVX Director® network appliances can be deployed to handle corporate enterprise, university, governmental, military, medical, transportation, sports, entertainment, hospitality, gaming, and retail applications.
Simple and Flexible Configuration
The DM-NVX-DIR-80 automatically discovers up to 80 DM NVX endpoints on the network, and enables each endpoint to be assigned as a logical input or output within a single domain. The DM-NVX-DIR-80 routes inputs of DM NVX endpoints to outputs of DM NVX endpoints within the domain. Each DM-NVX-DIR-80 network appliance in a system functions as a separate domain.
NOTE: For information about DM NVX Director network appliances that support multiple domains, refer to the DM-NVX-DIR-160 and DM-NVX-DIR-ENT product pages.
Easy Web-Based Setup and Control
The DM-NVX-DIR-80 provides an intuitive web-based user interface to facilitate system configuration, signal routing, and diagnostics of the complete AV network. Each domain and endpoint, as well as the inputs and outputs of each endpoint, can be designated with a user-friendly name. Navigating the entire system is easy using the search box to quickly find domains, endpoints, inputs, and outputs by name or address. A system overview screen is also provided, showing the video and audio signal status for every input and output in a graphical layout that’s easy to view and navigate.
Multicast Address Control
A custom multicast range can optionally be assigned for DM NVX encoder and decoder endpoints within a domain. The custom multicast range is determined by the assignment of a starting multicast address, the number of multicast addresses assigned to each DM NVX endpoint, and the number of DM NVX endpoints assigned to a domain. Multicast address control is accomplished by using the web interface.
Credential Management of DM NVX Endpoints
Username and password credentials can be changed simultaneously for all DM NVX encoder and decoder endpoints within a domain. Alternatively, the username and password can be changed for only particular DM NVX endpoints within a domain. Username and password credential management is accomplished by using the web interface.
Key Features
- Network AV system configuration, management, and signal routing
- Compatible with DM NVX® encoders and decoders
- Support of 80 endpoints in a single domain
- Fully scalable for a network of any size
- Intuitive web-based graphical user interface
- Full programmable control of the virtual matrices and physical endpoints
- Automatic endpoint device discovery
- Multicast address control
- Credential management of DM NVX endpoints
- Custom naming and search tools
- Easy diagnostics and signal status display
- XML device map file import and export
- Built-in logging
- Four 1000BASE-T RJ-45 ports
- 1 RU 19-inch rack-mountable
- Universal 100-240V internal power supply