NetPA 1001-70V AT – Mono 70 V Audio Power Amplifier with Dante
Mono 70 V Audio Power Amplifier with Dante – 100 Watts
Key Features
- Receives input signal via the Dante® audio network
- 100 watts rms output power:
- 1 x 100 watts @ 70 volts
- ENERGY STAR® qualified amplifier
- Dante audio networking provides a wide range of expansion capabilities
- Dante audio to line level output
- Professional grade signal-to-noise and THD+N performance
| Specification | NetPA 1001‑70V AT |
|---|---|
| Amplifier type | Class D with CDRS™ |
| Output power | 100 W RMS @ 70 V nominal |
| Load impedance | Minimum 50 Ω speaker line |
| Audio input | 1 channel Dante RX (RJ‑45, 100 Mbps) |
| Line output | 1 balanced/unbalanced line-level (3.5 mm captive screw) |
| Max line output level | +15 dBu balanced, +9 dBu unbalanced |
| Frequency response | 20 Hz–20 kHz ±1 dB |
| High‑pass filter | Switchable 80 Hz (12 dB/octave) |
| Latency | Dante: user selectable (e.g. 2 ms default, also 5 ms) |
| Power | 100–240 VAC, 50/60 Hz, 0.5 A |
| Idle power | ~7.6–7.7 W; Sleep <2 W |
| Efficiency | Approx. 65% at 1/8 power |
| Dimensions | 1.7″ H × 8.7″ W × 9.5″ D (4.3 × 22.1 × 24.1 cm) |
| Weight | ≈ 1.2 kg (2.6 lbs) |
| Cooling | Passive (convection) |
| Protection features | Thermal, short‑circuit, DC-fault, clip limiter |
| Indicators | LEDs: signal, protect, Dante link |
| Mounting | Half‑rack 1U; optional shelf or under‑table kit |
| Operating temp / humidity | 0–40 °C; 10–90% non‑condensing |
| Storage temp | −40 to +70 °C |
| Certifications | ENERGY STAR®, CE, UL, RoHS, FCC B, ICES, WEEE etc. |
| Warranty | 3‑year parts & labor; 7‑year Everlast PSU warranty |
The Extron NetPA 1001‑70V AT is a professional-grade mono power amplifier that seamlessly integrates with Dante® digital audio networks. Designed for distributed audio or voice reinforcement systems, this amplifier delivers 100 watts RMS at 70 volts to 70 V speaker lines. Its half‑rack, 1U convection‑cooled enclosure offers quiet, reliable performance without fans or vents. The unit is ENERGY STAR® certified, featuring efficient Class D amplification with Extron’s patented CDRS™ (Class D Ripple Suppression) for superior audio fidelity and minimal interference
It accepts Dante audio over a standard Ethernet network, and can also output a fixed line‑level signal, enabling feed to a secondary zone or assistive listening system. Additionally, a recessed rear-panel level control enables secure gain staging for zone-based setups. Multiple onboard protection features—including overheat, short-circuit, DC-fault detection, and an automatic clip limiter—ensure trusted performance. The amplifier also includes an auto power‑down timer (default 25 minutes, defeatable for 24/7 use), significantly reducing standby energy consumption while powering up in under a second when audio is detected