NetPA U 8001 SUB – Mono Subwoofer Amplifier with Dante and DSP
Mono Subwoofer Amplifier with Dante and DSP 800 watts
Key Features
- 800 watts rms mono output power at 8 ohms
- ENERGY STAR qualified amplifier with selectable auto-standby
- InstaWake™ exits auto-standby mode in under 100 milliseconds
- Onboard DSP with 4×5 mix matrix
- Mounts in a rack or directly to an SF 10C SUB
- Frequency range optimized for subwoofers from 20 Hz to 1 kHz
| Specification | Details |
|---|---|
| Amplifier Output | Up to 800 W RMS @ 8 Ω; 650 W @ 4 Ω; 325 W @ 2 Ω |
| Frequency Range | 20 Hz – 1 kHz (subwoofer optimized) |
| DSP Mix Matrix | 4 inputs × 5 outputs with Linkwitz‑Riley crossover support |
| Network Audio Support | Dante RX/TX; Dante Domain Manager; AES67 compatible |
| Energy & Standby | Auto-standby (~25 min), <4 W standby, InstaWake™ <100 ms; ENERGY STAR qualified |
| Amplifier Efficiency | ~69–77% (typical) |
| Cooling & Enclosure | Fanless convection; UL 2043 plenum-rated with optional conduit kit |
| Control Interfaces | Dante network, RS‑232; status LEDs front/rear |
| Connectors | Speaker outputs via screw-lock captive screw; analog line outputs; RS-232; AT (Ethernet) port |
| Protection Features | Clip limiter, DC fault, thermal, overheat, short protection |
| Mounting Options | Half-rack, 1U; rack ear & bridge plate included; direct mount to SF 10C SUB supported |
| Power Supply Warranty | Everlast PSU covered for 7 years |
The Extron NetPA U 8001 SUB is a powerful, mono subwoofer amplifier specially designed for Dante® network audio systems. It delivers up to 800 W RMS into 8 Ω speakers (650 W at 4 Ω; 325 W at 2 Ω), in a half-rack, 1U convection-cooled enclosure that is UL 2043 plenum-rated—perfect for direct mounting to Extron’s SF 10C SUB in-ceiling subwoofer or use in rack installations.
This ENERGY STAR® certified device features ultra-efficient Class D amplification with patented CDRS™ (Class D Ripple Suppression), minimizing RF interference while extending system reliability. It includes integrated DSP with a 4×5 mix matrix, adjustable crossovers, filters, dynamics, delay, ducking, and line outputs for flexible routing and processing.
Thanks to InstaWake™ technology, the amplifier exits standby in under 100 ms with minimal inrush current, and has selectable auto-standby to reduce idle power consumption—drawing less than 4 W in standby mode.