SAROS SB-200-P-B – Saros® Sound Bar 200, Powered, Black
Provides enhanced audio performance for any flat panel display.
| Features & Performance | ||
| Woofers | (2) 3 inch (76 mm) polypropylene cone w/rubber surround | |
| Passive Radiators | (2) 3 x 4-3/8 inch (76 x 112 mm) polypropylene cone w/rubber surround | |
| Tweeters | (2) 1 inch (25 mm) polyester dome | |
| Amplifier Power | 20 Watts per channel, stereo | |
| Frequency Response | 100 Hz to 20 kHz (±3 dB) | |
| Output Sensitivity | 83 dB SPL @ 1 meter, both channels driven @ 1 Watt each | |
| Input Sensitivity | 0.75 Vrms per channel for full rated output | |
| Go To Sleep Time | 20 minutes (±5 minutes) with no signal present | |
| Wake Threshold | 5 mV (±2 mV) typical | |
| Connectors | ||
| BALANCED AUDIO INPUTS | (1) 5-pin 3.5 mm detachable terminal block; Balanced stereo line-level audio input [1]; Maximum Input Level: 0.85 Vrms; Input Impedance: 10k Ohms | |
| UNBALANCED AUDIO INPUTS | (2) RCA connectors, female; Unbalanced stereo line-level audio input [1]; Maximum Input Level: 0.85 Vrms; Input Impedance: 10k Ohms; NOTE: Right-angle plugs may be required for wall mount applications. A 59 inch (150 cm) right-angle RCA to straight RCA stereo cable is included. | |
| 100-240V~50/60Hz 50W | (1) IEC 60320 C8 main power inlet; Mates with removable power cord, included | |
| Controls & Indicators | ||
| 100-240V~50/60Hz 50W | (1) Rocker switch, turns main power on or off | |
| PWR | (1) Blue LED, indicates the main power switch is turned on | |
| Power Requirements | ||
| Main Power | 50 Watts (500 mA maximum) @ 100-240 Volts AC, 50/60 Hz | |
| Environmental | ||
| Temperature | 41° to 104° F (5° to 40° C) | |
| Humidity | 10% to 90% RH (non-condensing) | |
| Construction | ||
| Enclosure | Plastic housing with perforate metal grille, black | |
| Mounting | Freestanding or wall mount (bracket included) | |
| Dimensions | ||
| Height | 4.18 in (106 mm) | |
| Width | 40.60 in (1031 mm) | |
| Depth | 2.78 in (71 mm); 2.96 in (76 mm) with wall mount bracket | |
| Weight | ||
| 7.8 lb (3.6 kg) | ||
The Saros® SB-200-P is a stereo sound bar designed to provide enhanced audio performance for a flat panel display. Its full-range, front-firing speakers offer an improvement over the small, rear-facing speakers typical of many display devices. The bracket included with the sound bar allows for attachment to a wall surface, or the unit can be placed on a shelf below or above the display.
Built-in amplification allows for direct connection to the line-level audio output of the display device, or to the output of an audio preamp, switcher, mixer, tv tuner, codec, or Crestron DM® receiver.[1] The amplifier powers on automatically when an audio input signal is detected, and powers off if no signal is detected for several minutes.
The SAROS SB-200-P sound bar is ideally suited for use with the Crestron RL® 2 Group Collaboration System and other unified communication and videoconferencing systems. It is equally well-suited for use in any small to medium sized room or public space in a hotel, restaurant, museum, medical center, airport, office building, or residence.
Key Features
- High-quality, full-range amplified stereo sound bar
- Delivers enhanced sound quality and performance for use with any flat panel display
- Mounts to a wall or sits on a shelf
- Balanced or unbalanced stereo line-level audio input [1]
- Unbalanced stereo audio cable included
- Powers on and off automatically
- 100 to 240 Volt AC powered