TLI Pro 101 – TouchLink Interface
Key Features
- Compatible with third-party touchscreen displays up to 1920×1200, including HDTV 1080p/60 and 2K
- Fast processing and ample memory
- Compatible with all IP Link Pro control processors
- Power over Ethernet allows the interface to receive power and communication over a single Ethernet cable, eliminating the need for a local power supply – PoE injector sold separately
- Supports HDCP-compliant HDMI for full-motion video preview and monitoring
- Advanced Extron video signal processing with a high performance scaling engine
| TLI Pro 101 | |||
| Video input | |||
|---|---|---|---|
| Resolution range | 800×600 to 1920×1200*, 2K, or 1080p (HDTV) * reduced blanking | ||
| Number/signal type | 1 HDMI (HDCP compliant) | ||
| Connectors | 1 female HDMI type A | ||
| Horizontal frequency | 18.75 kHz to 75 kHz | ||
| Vertical frequency | 24 Hz to 75 Hz | ||
| Standards | DVI 1.0, HDMI, HDCP | ||
| Video processing | |||
| HDMI pixel data bit depth | 8, 10, or 12 bits per channel; 165 MHz pixel clock | ||
| Colors | 1 billion (10 bit processing) | ||
| Memory | |||
| SDRAM | 512 MB | ||
| Flash | 512 MB | ||
| Video output | |||
| Number/signal type | 1 HDMI (HDCP compliant) | ||
| Connectors | 1 female HDMI type A | ||
| Supported resolutions | 800×6001, 1024×7681, 1280×7681, 1280×8001, 1280×10241, 1360×7681, 1366×7681, 1440×9001, 1400×10501, 1600×9001, 1680×10501, 1600×12001, 1920×12001 720p2, 1080p3, 2048×10803 | ||
| 1 = 60 Hz, 2 = 25 Hz, 29.97 Hz, 30 Hz, 50 Hz, 59.94 Hz, and 60 Hz 3 = 23.98 Hz, 24 Hz, 25 Hz, 29.97 Hz, 30 Hz, 50 Hz, 59.94 Hz, and 60 Hz | |||
| |||
| Audio input | |||
| Number/signal type | 1 embedded digital audio from HDMI (LPCM-2Ch only) | ||
| Connector | 1 female HDMI type A | ||
| Audio output | |||
| Number/signal type | 1 embedded digital audio on HDMI | ||
| Connector | 1 female HDMI type A | ||
| Playback format(s) | |||
| Container format | WAV (Microsoft RIFF) | ||
| Encoding | LPCM (uncompressed) | ||
| Bit depth | Unsigned 8-bit Signed 16-bit Signed 24-bit Signed 32-bit | ||
| Sampling rate | 2 kHz to 192 kHz | ||
| Audio channels | mono and stereo | ||
| Communication — Ethernet interface | |||
| Ethernet control/communications port | 1 female RJ-45 connector | ||
| Ethernet data rate | 10/100 Base-T, half/full duplex with autodetect | ||
| Protocols | DHCP, DNS, HTTP, HTTPS, ICMP, SFTP, SSH, TCP/IP, UDP/IP | ||
| Default settings | Link speed and duplex level: autodetected IP address = 192.168.254.251 Subnet mask = 255.255.255.0 Default gateway = 0.0.0.0 DHCP = off DNS = 127.0.0.1 | ||
| Program control | Extron Global Configurator Plus and Professional Extron GUI Designer | ||
| USB device ports | |||
| Number/signal type | 1 high-speed USB 2.0 device | ||
| Connectors | 1 USB type A female | ||
| Maximum built-in USB hubs | 0 | ||
| Minimum built-in USB hubs | 0 | ||
| USB standards | USB 2.0, USB 1.1, USB 1.0 compatible | ||
| USB data rates | Low speed (1.5 Mbps), full speed (12 Mbps) | ||
| Available USB power | 900 mA | ||
| General | |||
| Power supply | External | ||
| Power input requirements | 12 VDC or Power over Ethernet (PoE 802.3af, class 3) | ||
| Power consumption — Power injector (XTP PI 100, not included) | |||
| Device | 8.8 watts | ||
| Device and power injector | 12.2 watts | ||
| Power consumption — 12 VDC power supply (PS 1210 C, not included) | |||
| Device | 7.5 watts | ||
| Device and power supply | 9.1 watts | ||
| Power over Ethernet (PoE) requirements | Complies with 802.3af, class 3 | ||
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing | ||
| Cooling | Convection | ||
| Thermal dissipation — Power injector (XTP PI 100) | |||
| Device | 28.9 BTU/hr | ||
| Device and power injector | 40.3 BTU/hr | ||
| Thermal dissipation — 12 VDC power supply (PS 1210 C) | |||
| Device | 22.6 BTU/hr | ||
| Device and power supply | 28.1 BTU/hr | ||
| Rack mount | Yes | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | 1.7″ H x 8.7″ W x 9″ D (1U high, half rack wide) (4.3 cm H x 22.1 cm W x 22.9 cm D) (Depth excludes connectors) | ||
| Product weight | 1.74 lbs (0.79 kg) | ||
| Shipping weight | 4 lbs (2 kg) | ||
| DIM weight (International) | 5 lbs (3 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | CE, C-tick,FCC Class A, ICES, VCCI | ||
| Environmental | Complies with the appropriate requirements of RoHS and WEEE. | ||
| Warranty | 3 years parts and labor | ||
| |||
| |||
The Extron TLI Pro 101 is a TouchLink® Interface that allows a third-party touchscreen display to be used as a point of control within an Extron Pro Series control system. This unique interface includes a scaled HDCP-compliant HDMI input for video preview. The scaled output supports displays from 800x600 to 1920x1200, as well as HDTV 1080p/60 and 2K. The TLI Pro 101 works with any Extron IP Link® Pro control processor, enabling third-party touchscreen devices to be used for complete, interactive control of a broad range of source devices.
As with all TouchLink Pro touchpanels, the TLI Pro 101 operates using a standard network infrastructure and is easy to install with reliable and cost effective Ethernet cable. All TouchLink Pro touchpanels are customized using Extron GUI Designer software. This powerful interface design software offers ready-to-use resource kits to help design a wide variety of interfaces for rooms and presentation environments.
Features
- Compatible with third-party touchscreen displays up to 1920x1200, including HDTV 1080p/60 and 2K
- Fast processing and ample memory — Allows for quicker configuration uploads and more storage for GUI pages.
- Compatible with all IP Link Pro control processors
- Power over Ethernet allows the interface to receive power and communication over a single Ethernet cable, eliminating the need for a local power supply - PoE injector sold separately
- Supports HDCP-compliant HDMI for full-motion video preview and monitoring
- Advanced Extron video signal processing with a high performance scaling engine
- One high speed USB 2.0 port for third-party touchscreens or HID support — Increases device functionality.
- Automatic clock synchronization allows touchpanel to display the accurate time and date
- Adjustable sleep timer puts interface into sleep mode
- Fully customizable using Extron control system software — GUI Designer combined with Global Configurator Plus, Global Configurator Professional, or ControlScript programming.
- Supports the Extron Control App and Extron Control for Web
- JITC Certified — Successfully completed interoperability and information assurance testing for use in government applications and other mission-critical environments.
- 1U, half rack width metal enclosure
- External Extron Everlast™ power supply included, replacement part #70-1174-01 — Provides worldwide power compatibility with high‑demonstrated reliability and low power consumption
- Extron Everlast Power Supply is covered by a 7‑year parts and labor warranty