TLP Pro 725M – 7″ Wall Mount TouchLink Pro Touchpanel
Key Features
- 7″ capacitive touchscreen with 1024×600 resolution and 24-bit color depth
- Gorilla Glass® screen is tough, scratch and smudge-resistant
- Faster, quad-core processing and eight times more memory
- Can be mounted in a two-gang junction box, or on a wall, lectern, or any flat surface, including glass
- Works with any Extron control processor and HC 400 Series system
- Transform your touchpanel into an all-in-one Pro xi Series control system using LinkLicense for TLP Control Processor and the TLCA 1 TouchLink Control Port Expansion Adapter
| TLP Pro 725M Series and TLS 725M | |||
| Display | |||
|---|---|---|---|
| Screen type | TFT Active matrix color LCD | ||
| Size | 7″ (17.8 cm), measured diagonally | ||
| Resolution | 1024×600 (WSVGA) | ||
| Pixel density | 170 PPI | ||
| Aspect ratio | 17:10 | ||
| Color depth | 24 bit, 16.7 million colors | ||
| Transparency | 8 bit | ||
| Brightness | 420 nits (cd/m2) | ||
| Contrast | 700:1 | ||
| Backlight | LED | ||
| Viewing angle | ±75° horizontal, +70°/-75° vertical | ||
| Touch screen | Capacitive | ||
| Storage | |||
| SDRAM | 2 GB | ||
| Flash | 8 GB | ||
| Ethernet | |||
| Connectors | 1 female RJ-45 connector | ||
| Data rate | 10/100/1000Base-T, half/full duplex with autodetect | ||
| Protocols | DHCP, DNS, HTTP, HTTPS, ICMP, IEEE 802.1x, SFTP, SSH, TCP/IP, UDP/IP | ||
| Default settings | Link speed and duplex level = autodetected IP address = 192.168.254.251 Subnet mask = 255.255.255.0 Default gateway = 0.0.0.0 DHCP = off DNS = 127.0.0.1 | ||
| Software | |||
| TLP Pro 725M Series | |||
| Configuration software | Global Configurator Plus and Professional, GUI Designer | ||
| Programming software | ControlScript Programming | ||
| Control apps | Extron Control | ||
| Resource management software | GlobalViewer Enterprise | ||
| Utilities | Toolbelt, Embedded web page | ||
| TLS 725M | |||
| Configuration software | Room Agent | ||
| Sensors | |||
| Motion sensor | On/off | ||
| Light sensor | Auto/manual | ||
| USB | |||
| Quantity/type | 1 high-speed USB 2.0 | ||
| Connectors | 1 Micro-B receptacle | ||
| Standards | USB 2.0, USB 1.1, USB 1.0 compatible | ||
| Max. data rates | Low speed (1.5 Mbps), full speed (12 Mbps), high speed (480 Mbps) | ||
| Digital input | |||
| Quantity/type | 1 digital input (configurable) | ||
| Connectors | (1) 3.5 mm captive screw connector, 2 pole | ||
| Digital inputs | |||
| Input voltage range | 0 to 24 VDC, clamped at +30 VDC | ||
| Input impedance | ≥10k ohms | ||
| Programmable pullup | 1k ohms to +5 VDC | ||
| Threshold low to high | 2.8 VDC | ||
| Threshold high to low | 2.0 VDC | ||
| Pin configuration | 1 = Digital input, 2 = Gnd | ||
| Audio output | |||
| Speaker output | 1 mono, 89 dB Max. SPL @ 0.1 m | ||
| Frequency response | 750 Hz to 20 kHz, ±5 dB | ||
| Playback format(s) | |||
| Container format | WAV (Microsoft RIFF) | ||
| Encoding | LPCM (uncompressed) | ||
| Bit depth | Unsigned 8-bit Signed 16-bit Signed 24-bit Signed 32-bit | ||
| Sampling rate | Up to 192 kHz | ||
| Audio channels | Mono or stereo | ||
| General | |||
| Power supply | Not included | ||
| Power input requirements | Power over Ethernet (PoE 802.3af, class 3) | ||
| Power consumption — Power injector (XTP PI 100) | |||
| Device | 8.5 watts | ||
| Device and power injector | 11.6 watts | ||
| Auxiliary power output | |||
| USB | 5 VDC, 275 mA | ||
| Ambient temperature/humidity | Storage: -4 to +140 °F (-20 to +60 °C) / 10% to 90%, noncondensing Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing | ||
| Cooling | Convection, vents on back | ||
| Thermal dissipation — Power injector (XTP PI 100) | |||
| Device | 24.3 BTU/hr | ||
| Device and power injector | 34.7 BTU/hr | ||
| Mounting | Wall, furniture, or rack | ||
| Enclosure type | Plastic | ||
 | |||
| Enclosure dimensions | 5.05″ H x 7.24″ W x 1.20″ D (128 mm H x 184 mm W x 30 mm D) Touchpanel projects 1.01″ (26 mm) from the mounting surface | ||
| Product weight | 1.10 lbs (0.50 kg) | ||
| Regulatory compliance | BIS, CE, C-Tick, c-UL,FCC Class B, ICES, RoHS, UL, VCCI, WEEE | ||
| Product warranty | 3 years parts and labor; touchpanel display and overlay components are covered for 1 year | ||
| |||
| |||
The Extron TLP Pro 725M is a 7" wall mount TouchLink® Pro Touchpanel with many enhanced features. We redesigned this latest TouchLink Pro Touchpanel inside and out with a new, high-performance quad-core processor, eight times more memory, and a higher resolution, 1024x600 capacitive touchscreen built with scratch and smudge-resistant Corning® Gorilla Glass®. The TLP Pro 725M also features the convenience of PoE - Power over Ethernet, which allows it to receive power and communication over a single Ethernet cable. It is ideal for any environment requiring a stylish, wall-mountable touchpanel with a fully-customizable interface.
The TLP Pro 725M works with any Extron control processor and HC 400 Series system and is designed for use in AV system applications that require complete, interactive control of a broad range of source devices. TouchLink Pro touchpanels operate using standard network infrastructure and are easy to install with reliable and cost effective Ethernet cable.
All TouchLink Pro touchpanels can be customized using Extron GUI Designer software. This powerful interface design software offers ready-to-use templates for a wide variety of rooms and presentation environments. These designs may be used as is, or customized for the application by simply changing individual graphic elements.
Transform This Touchpanel Into an All-in-One Pro xi Series Control System
Extron LinkLicense for TLP Control Processor is a powerful, easy way to turn your TouchLink Pro touchpanel into a full-featured, standalone Pro xi Series control system. With this LinkLicense, you can control your AV devices via Ethernet directly from the Ethernet port on the touchpanel. And, by adding the optional TLCA 1 TouchLink Control Port Expansion Adapter, you can control a broad range of system devices directly from the touchpanel using the variety of ports on the control adapter.
The Extron TLCA 1 is a TouchLink Control Port Expansion Adapter designed to add traditional control ports to your touchpanel installed with a LinkLicense for TLP Control Processor. It features two bidirectional serial ports, one digital input, one IR port, and two relays for control of sources, directly at the touchpanel.
Features
- 7" capacitive touchscreen with 1024x600 resolution and 24-bit color depth — Vibrant edge-to-edge glass display with a more responsive control surface.
- Contemporary design that complements the aesthetics of any environment
- Gorilla Glass® screen is tough, scratch and smudge-resistant — Corning Gorilla Glass is stronger and more scratch-resistant than standard glass, while maintaining touch sensitivity, color saturation, and brightness.
- Faster, quad-core processing and eight times more memory — Drastically-enhanced response and overall user experience
- Can be mounted in a two-gang junction box, or on a wall, lectern, or any flat surface, including glass
- Works with any Extron control processor and HC 400 Series system
- Transform your touchpanel into an all-in-one Pro xi Series control system using LinkLicense for TLP Control Processor and the TLCA 1 TouchLink Control Port Expansion Adapter — Supports up to eight Ethernet-controllable devices using GC Plus and 32 using GC Pro.
- Digital input allows for a connection with a variety of devices, such as sensors and switches
- Power over Ethernet provides power and communication over a single Ethernet cable
- Built-in speaker — Provides audible feedback from button presses.
- Light sensor adjusts screen brightness as the ambient room lighting changes
- Configurable red and green status lights indicate a room's availability or call status
- System connection status indicator provides visual feedback if the touchpanel is not communicating with a control processor
- High speed USB 2.0 port — For future expansion.
- Automatic clock synchronization allows touchpanel to display the accurate time and date
- Energy-saving features:
- Adjustable sleep timer puts touchpanel into sleep mode
- Motion detector wakes touchpanel - Manage, monitor, and control this device remotely using GVE - GlobalViewer Enterprise Resource Management software
- Fully customizable using Extron control system software — GUI Designer combined with Global Configurator Plus, Global Configurator Professional, or ControlScript programming.
- TAA Compliant version available — Please inform your local Extron representative if your order requires compliance with TAA regulations.