XPA U 2008 FX – Eight Channel Configurable Output Audio Power Amplifier
Eight Channel Configurable Output Audio Power Amplifier – 200 Watts Per Channel
Key Features
- Eight 200 watt channels into 8 ohms, 4 ohms, 70V, or 100V
- Configurable output mode per channel
- Flexible power allocation to match system requirements
- Auto standby saves energy
- InstaWake+™ exits auto-standby mode in under 5 milliseconds
| Category | Specification |
|---|---|
| Output Power | 200 W per channel into any supported load (all channels); up to 400 W when one of a channel pair is used alone |
| Frequency Response | 20 Hz–20 kHz, ±1 dB (all load types) |
| THD + Noise | ≤ 0.1% @ 1 kHz (3 dB below clipping) |
| Signal‑to‑Noise Ratio | ~100 dB (20 Hz–20 kHz, unweighted) |
| Common-Mode Rejection | ~75 dB @ 1 kHz typical |
| Damping Factor | >100 |
| Audio Inputs | 8 balanced/unbalanced via 5‑pin 3.5 mm captive‑screw connectors; impedance >10 kΩ; nominal +4 dBu; max +20 dBu |
The Extron XPA U 2008 FX is an advanced, eight‑channel professional power amplifier, delivering 200 W RMS per channel into 4 Ω, 8 Ω, 70 V, or 100 V speaker loads—making it suitable for flexible multi-zone installations. Each channel’s output mode is independently switchable via rear‑panel rotary selectors, facilitating mixed low‑impedance and distributed‑line speaker deployment within a single rackspace.
With flexible power sharing between adjacent channel pairs, the amplifier can allocate up to 400 W per channel when the opposite channel in the pair is not used, ensuring efficient power distribution for varied zone demands. Intelligent energy-saving features include ECO Standby (auto-standby after ~25 minutes of inactivity) and InstaWake+™, which restores full power in under 5 ms with minimal inrush current .
The unit features a fan‑cooled front-to-rear airflow design with washable filters, allowing rack stacking without empty adjacent spaces . Built-in power factor correction improves line reliability and reduces harmonic interference .