Dante Power Amp 30
This compact amp acts as a full Dante audio bridge and powers two passive speakers at 15 watts per channel. Convert axnalog to Dante, Dante to analog, or do both at once.
Plenum rated and powered by PoE+ or 12V DC. Includes balanced or unbalanced analog I/O, 2 channel digital I/O, and 48kHz 24-bit audio conversion. The integrated DSP gives you gain, EQ, and volume control, all accessible through the WebUI or open API.
| Category | Specification |
|---|---|
| Product Name | Turtle AV Dante Power Amp 30 |
| Amplifier Type | Class D |
| Output Power | 2 × 15 W @ 4/8 Ω (stereo) / 1 × 30 W @ 4/8 Ω (bridged mono) |
| Analog Inputs | Balanced/unbalanced Mic In (min –35 dBV) / Line In (max +24 dBu) |
| Analog Outputs | Balanced/unbalanced Line Out (max 2 V RMS) |
| Input Impedance | 20 kΩ (balanced) / 10 kΩ (unbalanced) |
| Output Impedance | 600 Ω (balanced) / 300 Ω (unbalanced) |
| Frequency Response | 20 Hz – 20 kHz (± 0.5 dB) |
| Signal-to-Noise Ratio | > 100 dB (A-weighted) |
| THD + N | < 0.01 % at +4 dBu, 1 kHz |
| Digital Audio Format | Dante / AES67 (2 channels, 44.1–96 kHz, 16/24-bit) |
| Network Ports | 1 × Dante Primary (RJ-45 PoE+) + 1 × Dante Secondary (RJ-45 PoE+) |
| Network Bandwidth | 100 Mb/s Ethernet |
| Configurable Latency (Dante) | 2 ms / 3 ms / 4 ms / 5 ms / 10 ms |
| Configurable Delay (AMP Output) | 0 – 50 ms |
| DSP Functions | Input gain, EQ, delay, volume control, preset storage |
| Power Options | PoE+ (IEEE 802.3at Class 4) / 12 V DC input |
| Power Consumption | Approx. 39 W (max) |
| Chassis | Metal, plenum-rated, fanless design |
| Dimensions (W × D × H) | 180 mm × 118 mm × 23 mm |
| Weight | Approx. 0.7 kg (1.5 lb) |
| Operating Temperature | 0 °C – 40 °C (32 °F – 104 °F) |
| Humidity | 20 % – 90 % (non-condensing) |
| ESD Protection | ± 8 kV (air) / ± 4 kV (contact) |
The Turtle AV Dante Power Amp 30 is a compact, plenum-rated power amplifier that seamlessly integrates Dante® Audio-over-IP networking with professional analog amplification. Delivering up to 2 × 15 W stereo or 1 × 30 W bridged mono output, this Class-D amplifier provides reliable, high-fidelity sound for conference rooms, classrooms, and other fixed installations.
It combines amplification, Dante digital I/O, and analog connectivity in one unit, reducing system complexity and installation time. Supporting PoE+ (IEEE 802.3at) or 12 V DC power, the device can be installed in ceilings, walls, or racks without external power supplies, making it ideal for modern AV infrastructures.
Built-in DSP provides EQ, gain, delay, and volume control, easily managed via a web interface or open API. With its low noise, low distortion, and network redundancy, the Dante Power Amp 30 offers exceptional flexibility for integrators and installers.
Key Features
2 × 15 W @ 4/8 Ω stereo or 1 × 30 W @ 4/8 Ω bridged mono
Full Dante® and AES67 compliant digital audio I/O
Balanced/unbalanced analog inputs and outputs
Built-in DSP (EQ, gain, delay, volume) with web configuration
Plenum-rated metal chassis for ceiling/air-space installation
Power options: PoE+ (Class 4) or 12 V DC
Compact, fanless design with silent operation
Configurable latency and audio routing through Dante Controller