PowerShareX PSX2404D adaptable power amplifier
PowerShareX PSX2404D is a four-channel, 2400-watt smart amplifier designed for use with Bose Professional installed sound systems. Onboard DSP gives you instant access to optimized loudspeaker presets via ControlSpace Designer software with easy ecosystem integration across Bose Professional processors, loudspeakers, and controllers. Design, configuration, installation, and operation become simpler — so you can get the job done and move on to the next.
Bose PowerShareX PSX2404D Technical Specification
| Category | Parameter | Detail |
| Amplification | Rated Power, Symmetrical | 4 × 600 W (4/8 Ω, 70V/100V) / 800 W (2 Ω) |
| Max Peak Power | 1600 W (2 Ω) / 1200 W (4/8 Ω, 70/100V) | |
| Rated Power, Asymmetrical | Up to 1700 W (@ 4 Ω or 70V) | |
| Power Class | Class D (4 Channels) | |
| Frequency Response | 20 Hz – 20 kHz (±1.0 dB) | |
| SNR / THD+N | > 104 dB (A-weighted) / < 0.1% | |
| Channel Separation | -70 dB typical at 1 kHz | |
| Audio Inputs | Analog Input Channels | 4 Balanced, Line |
| Digital Input Channels | 4 Dante Channels | |
| Connectors | (1) 6-pin Euroblock (Analog), (1) RJ-45 (Dante) | |
| Max Input Level | 20 dBu | |
| Integrated DSP | DSP-Enabled | Yes (32-bit floating-point / 48 kHz / 24-bit) |
| Audio Latency | 2.5 ms (fixed-latency architecture) | |
| Processing | Matrix mixer, 8-band Input EQ, 9-band Loudspeaker EQ, Array EQ | |
| Delay | 2 s (input) + 100 ms (output) | |
| Electrical | Mains Voltage | 100–240 VAC (±10%), 50/60 Hz |
| Mains Connector | IEC C20 inlet | |
| AC Power Consumption | 31.1 W idle, 405 W maximum (1/8 power @ 4 Ω) | |
| Compliance | Safety Certification | EN 54-16 Certified (Voice Alarm Control) |
| Physical | Dimensions (H×W×D) | 45 mm × 483 mm × 358 mm (1.8″ × 19.0″ × 14.1″) |
| Net Weight | 7.0 kg (15.4 lb) | |
| Rack Space | 1 RU | |
| Cooling | Temperature-controlled fan (front-to-back airflow) |
- Power-sharing technology: Dynamically allocates power evenly or asymmetrically across outputs without having to bridge channels or lose channel count when powering Bose Professional loudspeakers.
- Bose Professional certified presets and ControlSpace Designer integration: Delivers the best performance, loudspeaker protection, and visibility of the entire Bose Professional system from a single UI for easy design, configuration, control, and monitoring.
- Proven Powersoft reliability: Ensures the systems operate every day, mitigating non-billable service calls.
- Flexible outputs: Capable of handling either low-impedance (2, 4, 8Ω) or high-impedance (70, 100V) loudspeaker loads.
- Built-in Dante audio: Supports up to 4 digital input channels from a Dante network eliminating the requirement of ordering and installing an accessory network card.
- 4 analog inputs: Provide line-level source connections.
- PowerShare Design Tool: A downloadable design tool that allows system designers the ability to choose their PowerShare amp and simulate the power-sharing capability that, in some cases, can lead to a lower-power model requirement and cost savings.
- GPIO connections: Provide a remote level, on/off, and alarm triggers.
- Network monitoring: Provides real-time system performance data, minimizing downtime, guesswork, and unnecessary service calls.
- Rack-friendly 1RU design: That is only 358 mm (14.1 in) deep eliminating the need for oversized racks.
- EN 54-16 compliant for reliable use in VA/PAVA systems with other compliant system components.